Instructions to Fix Linksys Extender Blinking Lights
Technical devices usually have LED indicators on them. If you own one you must have observed these lights. The status of the lights varies which indicates the current status of the device. The same is the case with the Linksys WiFi extender. There are three lights on it, Power, WPS and Ethernet LEDs. If you see any light on the Linksys extender blinking, then do not get puzzled. Walking through this guide will be helpful in learning about the blinking lights on your extender and also what you need to do to get them fixed.
What it Means to See Linksys Extender Blinking Lights?
As we mentioned earlier, there are three lights on the Linksys extender. Of these three lights, you may see the Power LED blinking green or orange. You would also see the Ethernet LED on the Linksys extender blinking green. We have discussed about all of these in the next section.
Power LED Blinking Green
You will see the Power LED on your extender blinking green in three scenarios:
1. The Device is Powering Up
When the extender is powering up you see a blinking green light. Whenever you connect your extender to the power source, you will notice the power light blinking green till it is booted up completely. As soon as the bootup process completes, the light turns solid. You can then connect to its WiFi.
If the device is stuck and keeps on blinking then you must check the power supply. A poor power supply is the main reason why this happens. Fixing the same will help you out.
2. Firmware Upgrade is Going On
The power light on your extender will blink in green color even when the firmware gets updated. Once the firmware updates are done, the light goes back to its normal state.
However, if it keeps on blinking, then performing a simple reboot will be helpful.
3. WPS Connection in Progress
WPS is the WiFi Protected Setup. During the WPS process also, the power light blinks green. The light turns solid after the Linksys wireless setup process is accomplished.
Power LED on Linksys Extender Blinking Orange
Let us tell you about seeing a blinking orange light on your extender.
1. Device is Ready for Setup
A Linksys extender blinking orange power light implies the extender is running on the default values and is now ready to be set up. Go ahead and set it up and you will see the light turn solid green.
2. Faulty Extender & Router Connection
If the connection between the Linkssye WiFi extender and the host router is not stable or there is no connection at all, then it blinks in orange color.
Bring the extender closer to the router or use an Ethernet cable to connect them.
If there is an Ethernet connection already in place, then check if the cable is damaged or loose.
3. WPS Connection Failed
When you are trying to set up your Linksys extender using the WPS method and the setup fails, then the power light on it will begin to blink in orange color.
All you need to do to get this fixed is reboot your extender and again try to set it up. If the WPS method fails again, then you can use the web interface method wherein you use the login address extender.linksys.com to carry out the setup process.
Linksys Extender Ethernet Light Blinking Green
Apart from the power light, the Ethernet LED on the Linksys wireless extender also blinks in green color at times. This usually happens when there is a data transmission in progress over the Ethernet port. Once the process is completed the light turns solid green.
If the light does not turn solid after that, then check the Ethernet cable for any damage on it. Also if the cable is loosely connected, the process does not get completed. So, replace the cable and connect it tightly to the right ports.
The Conclusion
This brings an end to our informative guide on the meaning of Linksys extender blinking lights. Now that you are aware of different scenarios wherein different lights on your Linksys WiFi extender blink, you can make the necessary amendments as per the current situation. Keeping the firmware of your extender upgraded with the latest version is suggested to get the maximum benefit from it. This also helps in fixing as well as preventing various issues with the extender.