Devices are Ignoring Closer Nodes [Techniques to Fix Issue]

Considering this blog post is being read by you, we are assuming that the devices are ignoring closer nodes is troubling you badly. Have you tried everything but still could not fix the issue? Well, it is because you did not follow the right troubleshooting solutions. You probably invested your time on the ones which had a fifty-fifty possibility of helping you out. But, worry not. We are here. Go through the fixes mentioned in this blog and get an understanding of how the issue in debate can be fixed with ease.

It is recommended that you avoid losing your cool in case any troubleshooting technique given below fails to rescue you. Remind yourself that you have got it covered and give resolving the devices are ignoring closer nodes issue another try.

How to Fix Devices Are Ignoring Closer Nodes Issue?

1. Power OFF the Client Device

The number one reason why the devices are ignoring closer nodes issue is bothering you are because of technical glitches. Relax; you do not have to blame yourself. The reason being, the invasion of these glitches is not your fault. They are known to come uninvited. To ensure that they do not disturb you any more than they already have, you ought to restart your client device, the one that you are using in the moment.

In case you face any technical issue with a regular Linksys router like myrouter.local not working, it can also be resolved with the help of the reboot process.

As soon as you have restarted or rebooted your networking device, it is recommended that you check in case the devices are ignoring closer nodes issue has stopped following you around. In case it has not, then you may continue reading.

2. Do a Proper Boot Sequence

Another thing that can be implemented from your end to resolve the devices are ignoring closer nodes issue is to perform a proper boot sequence. To execute the process, you need to make sure that you set up all the nodes at the parent location. Once you are done setting it up, turn OFF all the nodes. By the way, you need to do this using the parent node. Turn On the parent node and now hold on for the light to blink blue.

For your information, it might blink red for some time before becoming blue in color. So, avoid panicking. Now, you ought to place the Linksys Wireless child node 1 close enough to the parent node. Turn on the node. Place child node 2 near to child node 1 and turn it on.

To proceed further, it is recommended that you place the child node 3 close to the child node 2. In case light stays red, then it means that the connection to the node 2 is broken and it needs to be moved more close to the node 2.

If you want to confirm which nodes each child node is connected to, then it is advised that you go to the Linksys app and select Network Administration.

3. Turn Off the Client Steering

Given you are reading this troubleshooting technique, it can only mean one thing, i.e. you are still trying to make amends with the devices are ignoring closer nodes issue. To get rid of it once and for all, you should not think twice before turning off client steering. The linksyssmartwifi.com page now has a new tab where you cannot just configure client steering but also turn it off. Now, the question is, how to?

To answer that for you, you ought to read the instructions given in the manual of your networking devices. By the way, disabling the client steering option will not affect a mesh network. It will just stop the primary node from sending suggesting connection changes.

Final Note

This ends the troubleshooting guide based on how to resolve the devices are ignoring closer nodes issue. We are expecting that restarting the client device, disabling the client steering, and doing proper boot sequence helped you to get rid of the issue at hand. In case you are interested in becoming aware of how to troubleshoot more issues related to Linksys routers, visit this website whenever you are in the mood to.

By the way, in case you have set up a Linksys extender via extender.linksys.com in your home and would like to get acquainted with related queries as well, then the same platform needs to be chosen by you. In the blog section, you will find something new whenever you come. Also, we just do not talk about troubleshooting issues; blogs related to generic information related to the latest features rolled out by Linksys are also there. This means that if you are tech geek, then we have what it takes to satisfy your hunger for knowledge.