Linksys Velop mesh has a lot of models that you can easily setup in home by connecting it with your modem. You can complete the setup with Linksyssmartwifi.com which will take you to Linksys Velop interface.
There is a new model launched in the market which is Linksys Micro mesh system. In its package, you will get one router and two Velop nodes.
Here, you will get to know about how to complete the new Linksys Velop Micro mesh setup.
Here, in this section you will get to know about, how to setup, login, update, password change, restart and reset the Velop Micro mesh system. So, let’s get started.
To connect the router to the modem;
To connect router to the micro nodes;
Have a close at the configuration process which you can do with your phone via Linksys app.
To log in to the Micro mesh system to complete the setup, you have to connect your phone to the mesh network. Then follow some instructions;
You can also update its firmware and change the Network WiFi password with the help of your phone.
Have a look at how to set the firmware update in auto mode and how to change the network SSID username and password in Linksys wireless Velop system.
Restarting and resetting processes are the solution to make the settings refreshed and resetting them default again. By using Velop Troubleshooting, you can dispel any technical error.
Rebooting the device is easy, just turn it off and on for once. You can do it by unplug the devices from the wall socket and plugging them in again.
After resetting the device, you have to the re-configure it and set the settings again. To do that, find the RESET button on device. Press and hold it for 7 seconds and your mesh system will reset after some minutes.
Here, you have seen and learned about how to complete the Linksys Velop micro mesh setup.