Linksys Velop AX4200 Installation Process [How-to-Execute]
In case you want powerful WiFi 6 mesh coverage, then it is recommended that you opt for Linksys Velop AX4200. It is designed to deliver gigabit WiFi speeds up to 4.2 Gbps in order to cover every nook of your home. When we say this, we are also including the backyard and outdoor smart home devices. Apart from this, you can get these benefits:
Connect More Devices: It will cover up to 2700 sq ft and support more than 40 devices. Also, WiFi 6 sends as well as receives more than one stream of data at the same time.
Smart Security: Linksys Velop AX4200 provides a safe and sound home network with automatic firmware updates separate guest access, and parental controls.
Now that you have become of the many benefits that you will get after Linksys Velop AX4200 installation, it is recommended that you read the process highlighted below.
How to Execute Linksys Velop AX4200 Installation?
1. Gather All the Equipment
In case you have more than one router or node that you need to set up, ensure that you first collect all the equipment. Take our advice and do this in the same room where the modem is kept. The equipment which you need to gather is:
- Damage-free Ethernet cable
- Power adapters for each router
- Linksys Velop routers or nodes
For your information, you can change the location of the child nodes as soon as the Linksys Velop AX4200 installation process gets completed.
2. Remove the Existing Router
The next step in line is to remove the existing WiFi router. In other words, remove all the devices for the Linksys wireless system. Once done, it is recommended that you power cycle the existing modem. For this, you need to locate and press the power button on the modem and wait for some time. Once the wait is over, turn on the device.
3. Power ON the Parent Node
In case you have access to more than one Linksys node, then select one of them and then connect the modem to the router. For this, you need to use the internet port. Once done, power it on. Know one thing that if you have a WHWOx series model, then you can use any of the two ports. After the setup of the node, the ports will become the internet port.
4. Power ON the Child Nodes
Regardless of the number of child nodes that are placed near the parent node, power them up. It is recommended that the child nodes are not kept near the parent node for more than 10 ft. Also, ensure that no cables are connected to any of the ports of the child nodes during the Linksys Velop AX4200 installation process.
5. Connect to the WiFi Network
Make sure that your device is not connected to the WiFi network; it is recommended that you make it access one. Select SET UP A NEW WIFI NETWORK > VELOP & MESH ROUTERS. In case you are prompted, then it is recommended that you turn on Bluetooth. Read the on-screen steps which are provided and tap the Bluetooth icon.
For your information, in case you have already connected the parent node to the modem, hit the Next button. Power on the child nodes and hit the Next option again. Make sure that all the nodes have a solid purple light. Also, ensure that your mobile or client device is near the nodes while the nodes are being set up. Internet checking will soon begin.
Customize the WiFi name as well as the password. Click the Next button and then hit Continue. Log in the account with the valid details and follow the prompts.
It is recommended that you go through the guidelines given above in the same manner as they are given. Otherwise, you will be forced to do Linksys Velop troubleshooting.
The Bottom Line
This ends the blog post written on how to execute the Linksys Velop AX4200 installation process. Now that you have successfully set up the device, you will be able to gain access to a seamless internet connection on your client devices. In other words, you can now say goodbye to your old crappy internet days.