Linksys Node Blinking Red? Let’s Fix It Quickly

If your Linksys WiFi router is showing blinking red light then it means that there is some issue with the connection. Linksys router is not connected with the modem appropriately. Whereas a Linksys Velop red light which is blinking depicts that there is some problem with the connection between node and the primary unit in your mesh system.

Fixes to resolve Linksys Node Blinking Red Light Issue

Disconnect between Node and Primary Router

• Make sure that the node is within the router’s range or another node.
• To rectify the issue you can try moving the node closer to the primary router unit and wait if it connects.
• If this does not work then perform the power cycle on primary router and the troublesome node.

Firmware Trouble

It is essential to update firmware timely; you can get this done through Linksys app. You can also enable automatic firmware updates for your Linksys router. Out dated firmware could lead to network troubles, dis functionality and security issues.

You can also perform manual update by signing into Linksys router login and you will find the up gradation options under Administration icon.

Internet Connectivity Problem

• Make sure that the internet connection is running appropriately.
• If you feel that there is some hindrance in the signals then try rebooting your modem and router to rectify the glitches.
• Be mindful that the primary router unit is receiving proper internet signals.

Mesh Network Trouble

• It is very important that the nodes are well paired with the primary router.
• If issue still persist then you can try resetting the node and set up the connections all over again using Linksys app.

Overheated Hardware

• It is vital to keep the nodes in the ventilated area. Excess heat is usually troublesome for the technical equipment.
• Make sure that your router is placed in obstruction free area. Thick walls, big furniture items, electronic equipment and fish tank could produce signal blockages.

Reset

If you’re still having trouble, you might want to start your system over from the beginning. Restoring factory default settings will eliminate any problematic software or incorrect settings. Open your Linksys account in your browser, and then choose Administration.

Look for the “Factory Defaults” section. You will find a command called “Restore Factory Defaults.” If you choose to start your system from scratch and restore factory defaults, you will need all the necessary information; if you’re not sure what that includes, ask a support agent for assistance.

To Sum Up

So, this is all about the reasons behind Linksys node blinking red and the respective solutions to fix the issues. Hope this would suffice the purpose. If you feel stuck at some point then feel free to speak with the support team for clarity.