How to setup Linksys Velop AC1300?

A strong Wi-Fi signal is considered as a must in every part of the house whether you are just working, streaming or just browsing. The Linksys Velop AC1300 is equipped to fix dead zones and give you stable internet using a mesh system. This guide will help you to go through the full Linksys Velop setup helps you log in through the Linksys Velop login page and show how to extend your coverage with the help of Linksys extender setup and Linksys WiFi extender setup all in simple steps anyone can follow.

What Is the Linksys Velop AC1300?

Linksys Velop AC1300 is considered as the part of the Linksys mesh WiFi system. It is formulated to cover your entire home with reliable and stable WiFi, even the annoying weak signal areas where internet usually disappears.

Requirements Before setup

Before starting the setup process let’s have a look what all is required.

• Your Linksys Velop AC1300 box
• A phone or tablet (with the Linksys app installed)
• Your modem (connected and working)
• Active internet connection
• The default WiFi name and password (on the bottom of the node)

Now, as you have all the perquisites then the next thing is to discuss the steps of the process.

Step-by-Step: Linksys Velop Setup

Let’s understand the various setup process steps.

1. Plug It In

Take the main Velop node and plug it into power outlet. With the use of Ethernet cable connect it to your modem. You will observe the blue light is blinking.

Note: Wait till the time when blinking turns solid blue. The solid blue color indicates it is all set to go.

2. Install the Linksys App

If you do not the Linksys app then download it from the App Store (iOS) or Play Store (android). This is very helpful in the whole process of setup. You can also use the web browser to do Linksys Velop login but app is considered easier for setup.

3. Create or Log into Your Linksys Account

Open the app and create a Linksys account or log in if you have already an account. It is safe and necessary for network management.

4. Start the Setup Wizard

The app will automatically detect your node. Just follow the steps shown on the screen. It will ask you to where the node is placed and select the location. This is where your linksys velop setup actually begins. The node connects to the internet, updates firmware if needed and finalizes the primary setup.

5. Name Your WiFi Network & Set Password

Pick a name and password for your new WiFi network. Set the password which you can remember easily. This will replace your old WiFi if you are changing. Reconnect all your devices after this.

6. Add More Nodes (if needed)

If you have more nodes then plug each of the nodes close to the main node for pairing and after that you can move them to their permanent spots. This is where the linksys wifi extender setup comes in. Each added node makes your home WiFi strong.

7. Check Connection Quality

Before you place the second or third node somewhere random – check the signal quality. The app shows if it’s too far, too close, or just right.

Real talk: Do not place the node behind heavy objects.

Some Bonus Tips

• If the light is red then there is something off. It indicates that there is no internet from the modem. Reboot it.
• For the best performance, try to locate nodes evenly.
• You can always use linksys extender login from the browser later to fine-tune settings.

Expanding Your Network Using a Linksys WiFi Extender

Say you are not going for full mesh but using it as an extender – that’s doable. Follow a similar process:

• Power it on and wait for the blinking light.
• Use the app or go to linksyssmartwifi.com for the linksys extender setup page.
• Log in using default credentials if it’s new, or your updated login.
• Select your main WiFi, extend it, and boom—you’re done.

Tip: This process works the same if you’re doing a linksys wifi extender setup with another compatible extender from Linksys.

Troubleshooting Notes

• If the setup process fails in between then there is no need to worry. Verify to unplug everything, wait a minute and then restart.
• Try linksys velop login with your browser and type in http://myrouter.local or 192.168.1.1
• If you forgot your login then reset the node. Press it and hold for 10 seconds and start fresh.

Frequently Asked Questions