How to setup Linksys MX5503 Velop Atlas Pro 6E Mesh Tri-Band Router?

The Linksys MX5503 Velop Atlas Pro 6E is a powerful mesh Wi-Fi system which is designed to provide
fast and reliable internet throughout your home. Setting it up is quite simple but there are a few
important steps to follow to avoid issues. By following this guide, you can have your system up and
running in under 30 minutes.

Linksys MX5503 Velop Atlas Pro 6E Setup Guide

1. Step 1: Remove the Old Configuration

   Make sure to unplug your old router completely and the modem can be used. And once you have
   cleared the space then you have to plug the modem directly into the main Velop node by using
   Ethernet cable. This is the start of your linksys router setup.

2. Step 2: Power It Up

   Plug the power into the main node and wait. The lights will start blinking in different colors
   which is completely normal. It will turn to purple when it is ready.

3. Step 3: The Linksys App Is Essential

   You have to use the Linksys app for the initial setup. Download it from the App Store or Google
   Play. When you open it, it will ask you to sign in or create an account. This is where linksys
   velop login comes into play. You have to create a new account if you don't have it already.

   Once you are inside, the app will help you to go through the steps. Make sure to keep the phone
   close to the router during setup.

4. Step 4; Follow the App

   The app will detect the main node and ask you to name your network and set a password. You
   can give a different name to your network which you can remember easily. After naming it, the
   app will run through some quick checks. It might ask for firmware updates right there. Let it
   update and don’t skip.

5. Step 5: Add the Other Nodes

   Here is where most get confused. You can’t locate the other nodes according to you. The app
   will ask you to plug in the next node, wait for the light to turn purple and then it will connect
   automatically.

   This step in the linksys router setup needs patience. If the app is saying that signal is weak then
   move the node closer. Mesh works best when nodes are not too far apart.

6. Step 6: Verify the Network

   Once all nodes are added, walk around your house with your phone connected to Wi-Fi. If the
   signal is strong in all rooms, you have done. If you find dead spots, move the nearest node
   slightly closer to that area and re-check.

7. Step 7: Login for Settings

   Even after setup, you will need to change few settings such as parental controls, guest networks
   or maybe port forwarding. You have to go to the app and enter your login credentials. You can
   also log in from a web browser but the app is simple to use for most of the people.

8. Step 8: Don’t Forget Security

   Out of the box, the router will have WPA3 enabled, which is good. But double-check in the
   settings after linksys velop login that it is still on. Once the setup is complete make sure to
   chnage the default credentials which are admin and password.

Troubleshooting Tips If Setup Fails

Sometimes, even after doing everything properly the setup fails. Here are some of the points to
avoid the setup failure:

• If the app is unable to detect the router make sure to restart both the modem and main node.
• If a node won’t connect, try to reset it by holding it for 10 seconds.
• If the internet still doesn’t work after linksys router setup, check with your ISP as sometimes they need to “register” the new MAC address.
• Firmware updates helps to fix most of the errors so always keep them on auto-update.

FAQs