Linksys RE6400 Blinking Orange: Meaning & Solutions
Linksys RE6400 blinking orange light when WiFi range extender is undergoing network issues or if the device is not connected with router. There are variant factors responsible during the Linksys RE6400 Setup which might responsible for the outcome. Here are certain steps to diagnose and resolve the problem:
Also, you can use this tips on the Linksys RE6300 Setup, to dispel any orange light issue.
Reasons for Linksys re6400 blinking orange
Poor Placement: This could be the major reason, if the extender is placed too far from the home WiFi router which might be causing a weak signal and hampering the overall network.
Configuration Issues: If the extender is not connected properly or has lost its connection during the process might be one of the reason behind Linksys RE6300 blinking orange.
Out-dated Firmware: An out dated firmware could interfere with the network problems so this could be one of the major reasons for experiencing such issue.
Network Interference: If there is any physical obstruction by the thick walls, big furniture or any nearby electronic devices may disrupt the signal on a larger scale.
Router Problems: Inappropriate router settings or any significant problem with the router itself could be one of the reasons.
Now, you must have understood the basic ideology behind the issue Linksys re6400 blinking orange light, now let’s walk through towards the solutions.
How to Fix Linksys re6400 blinking orange
Restart the extender
Power cycling a device erases the customised settings and you can configure it all over again. To perform the restart, unplug the extender from the source outlet, pause for couple of minutes, and then re-plug it back in electrical wall outlet. This can fix short-term issues and technical glitches in the system. So, when nothing works it is always advisable to reboot the device.
Adjust the Extender’s Position:
This is very important point which needs to be considered always, avoid thick walls or electrical interference by other gadgets in the household; it is advisable to place the extender preferably midway between the router and the area that needs network coverage. This would help to resolve the issue Linksys re6400 blinking orange.
Update the firmware:
Use a browser to access the extender at http://extender.linksys.com, then enter the default login information (often “admin”).
Install any updates that are available by going to Administration > Firmware Upgrade. As an alternative, manually install updates after downloading them from the Linksys website. Doing so will help to rectify the reoccurring trouble with Linksys WiFi extender blinking orange.
Verify the compatibility of the router:
Make that the 2.4 GHz and 5 GHz bands on the router are turned on and broadcasting. Verify the Wi-Fi password that was entered during setup once more.
Resetting the factory:
When nothing works it is recommended to perform the default factory reset which resolves the technical glitches in the system. To start the resetting process press and hold the reset button on the extender for about 10 seconds at least, then release it. Once the reset process is complete you will notice a solid light on the power LED of the extender. You have to set it up again using the setup guide because resetting removes the customised settings so you have to configure it all over again from the scratch.
Minimize Network Congestion:
Disconnect unused devices from the network to improve stability. If multiple devices are connected with the same extended network then the unwanted guest consumes the signal strength which affects the connectivity. To resolve such issue it is vital to keep a secured password and keep cross checking the devices connected with the extender network time to time.
Contact Linksys Support:
If the issueLinksys RE6400 blinking orange persists after trying the above mentioned steps, you can reach out to Linksys support for further assistance.
Conclusion
This is all about the meaning and respective solutions for the problem Linksys RE6400 blinking orange. Hope the information provided would suffice the purpose and you will be able to tackle it smoothly.