How to Fix Linksys Velop Child Node Red Light Issue?

If the child node of your Linksys Velop is red, then it is a sign that your node is poorly connected to the parent node. Therefore, you should reduce the distance between the parent node and child node to fix the Linksys Velop child node red light issue. However, avoid making the distance too less.

But, how to check whether the child node is placed correctly or not? A good way to know that is an RSSI (Received Signal Strength Indicator) measurement that tells you how two nodes are communicating within a mesh system. Read this Linksys Velop troubleshooting guide to know how RSSI can be checked so that you can maintain a proper distance between nodes.

How to Check Node RSSI?

RSSI is measured in dBm (decibels per milliwatt). The scale starts at 0 dBm which means excellent signal and is expressed in negative integers from there. The measurement equal to or less than -70 dBm means poor signal.

Note: Linksys Parent node does not have any RSSI because it is connected to the modem with the help of a wired connection.

To check the RSSI of a specific node, you should follow the steps listed below:

• Launch the Linksys app and tap the Menu icon.
• Select Network Administration.
• Tap Nodes.
• Tap the Wireless Child node.
• The signal strength value will be indicated on the next page.

In case the value is less than -70dBm, you should bring the child node a little closer to the parent node. See if the Linksys Velop child node red light turns blue or not. FYI, the blue light means that the connection is good.

Troubleshooting Tips: Linksys Velop Child Node Red Light

If the Linksys Velop child node is still red, some other reasons might be causing the problem. You should take the help of the following tips to troubleshoot the Linksys wireless node issue you are facing:

1. Avoid Hiding the Node

Be very sure that your Linksys Velop child node is placed in an open space. You should avoid keeping it behind a TV or inside a cabinet. Do not place the child node close to large glass panes and large metal objects. Water-carrying objects must also be placed away from Linksys nodes.

Child Node Works Better As Per the Node It is Connected to

You should know that child node works according to the host node. Therefore, if you are not connecting the child node to the parent node, refer to the node detail screen on the Linksys app to ensure that you are connecting the child node to a node having good RSSI (0 dBm to -50dBm).

2. Update the Firmware

The outdated firmware of the mesh system can also be the reason why you are facing such a problem with your Velop node. To fix things, you should access the linksyssmartwifi.com URL and update the firmware of your mesh system. The same task can be completed with the help of the Linksys app too.

The Concluding Thought

The Linksys Velop child node red light issue simply means an internet connection problem. Therefore, all the workarounds were performed w.r.t. the factors responsible for internet connection. Hopefully, after taking the help of the given tips, you will be able to fix the problem.

Otherwise, you will have to reset all the Linksys nodes and set one of the child nodes as a parent node and vice-versa to resolve the issue.