Linksys AC2200: How to Reset It. Explain

If your Linksys AC2200 router is causing frequent lags and connection dropouts , or you can’t remember the passwords. In such cases resetting the router is preferable. The full reset takes a few minutes and restores everything to fresh.

The given blog gives us information on how to do both soft and hard resets in this article. We’ll also explain what the difference in each reset and why they are required differently. This guide also explains about various login methods via “192.168.1.1” and “myrouter.local”, and leave you with a rock-solid AC2200 ready for a clean setup.

When to Reset Your Linksys AC2200?

Let’s be honest: even the greatest technological devices tend to face problems minor glitches. Similarly for these routers, if any problem arises, here is how you can reset it:

• You can’t recall the password for the Linksys AC2200 router’s admin panel.
• The firmware upgrade didn’t work or the device is stuck halfway
• You want to start clean as you’ve made a lot of changes to the settings.
• The router is not working properly or the WiFi keeps dropping frequently.

Resetting clears everything off. You can get your settings back later if you back them up beforehand. Don’t worry if you don’t, it’s simple to recreate the important bits like SSID and passwords.

When to Use a Soft Reset?

Choose a soft reset when:

• The router is providing lagging signals or is not working well.
• You’ve just updated the firmware.
• There is a problem with DHCP or connection.

When to Use a Hard Reset

Choose a hard or factory reset when:

• You are not able to log into the admin panel anymore.
• The router’s firmware or configuration has failed, and even turning it off and on again isn’t making the device work.
• You sold or gave away the router and want to get rid of your own settings.

Soft reset

• Enter 192.168.1.1 or myrouter.local in your browser.
• Visit the router admin page by entering the username and password (often “admin,” but may vary. Referring to the instruction guide or the label on the device is the best way to get appropriate credentials.)
• Go to Administration or Utilities, depending on the version of the firmware.
• Click on Restart Device or Reboot.
• It’ll take around 2 minutes for the router to back up and reset the device. The router will restart now.

Doing a Hard Reset (or a factory reset)

• Look for the Reset button on the back or bottom of your router. It’s usually present in a minute hole labelled as “Reset”.
• Press and hold this button for around 10-15 seconds while the router is powered on.
• Let go of the button when the Power LED begins to flicker. This means the reset is complete.
• Give the router around 2–3 minutes to wipe of the previous settings and restart fresh.

Logging In After a Reset

After a hard reset, your AC2200 will restart:

• Use Wi-Fi or Ethernet to connect your device to the default SSID.
• In the address bar of any browser (Chrome, Safari, Microsoft Edge), enter “192.168.1.1” or “myrouter.local. The default credentials for username and password is “admin” (Refer to the device’s label to known exact default credentials).
• You’re starting again with the configuration of your Linksys AC2200 router setup.

Bonus Tips to follow while Reconfiguring the Router

After everything is erased, do these important things:

• Set different WiFi network names and passwords for both the bands i-e: 2.4 GHz and 5 GHz.
• Check is the device is asking for any firmware updates.
• Set up QoS rules, port forwarding, and parental controls again if you require.
• Use remote management with caution while enabling it.
• Backup your final settings for easy restoration.

How to Fix Problems After a Reset

If problems still happening after resetting:

• Check to see whether the firmware is up to date.
• If the admin panel is not loading, try using another web browser.
• Check the network wires or connect the laptop directly to the Ethernet.
• Power cycle your modem and switch. The AC2200 might not be the issue at all.

How to Avoid Future Resets

After everything is ready:

• Update the firmware regularly since Linksys routinely provides important fixes.
• Every few months, make a copy of your router’s settings.
• Secure your passwords in a safe place.
• Don’t use odd options unless you know what they do, such as port forwarding or VPN settings.

Conclusion

It’s easy and works well to reset your Linksys AC2200 router settings, whether you are performing a soft reset or a hard/factory reset.
All you need to know is, what is the problem your device is facing and what type of reset is suitable in that situation. Likely, if you can’t get in or need a new start, do a hard factory reset. If you are not facing any major issue and it’s just a minor glitch, do a soft reboot.

Keep in mind that a reset and a good configuration can keep your Wi-Fi reliable for years.

Frequently Asked Questions